ColiFin® 1 MIU and ColiFin® 2 MIU

 

Barcode 9120073451019

Product description

ColiFin® 1 MIU
Colistimethate sodium

Powder for Nebuliser Solution

Barcode 9120073451026

Product description

ColiFin® 2 MIU
Colistimethate sodium

Powder for Nebuliser Solution

Healthcare professionals, please sign in with DocCheck and benefit from additional information:

An external content, the DocCheck Login, is loaded here. If you can't see the login window, it's because you don't allow external content in your settings. For more information, please see our Privacy Policy.

PARI Pharma

How to contact PARI

PARI Pharma GmbH
Lochhamer Schlag 21
82166 Gräfelfing
Germany

Tel.: +49 (0) 89 742846-10
Fax: +49 (0) 89 742846-30

For questions within the UK please contact pharma-ukpari.com 

eFlow rapid Nebuliser

Instructions for use178D1028-D-07/16

2.04 MB Download PDF

Preparing your ColiFin® for inhalation

ColiFin® must be used immediately after dissolution. Do not dissolve ColiFin® until ready to administer a dose.

Please always read the leaflet for complete information.

 

Zubereitung von ColiFin für die Anwendung

Step 1

Take one vial of ColiFin® and gently tap the glass vial so that the powder settles to the bottom. This helps ensure you get the proper dose of medication. Open the vial by lifting up the red or lavender plastic over cap* on the top.

*ColiFin 1 MIU vial has a red plastic over cap ColiFin
2 MIU vial has a lavender plastic over cap

Zubereitung von ColiFin für die Anwendung

Step 2

Pull down the red or lavender plastic overcap together with the metal ring.
 

 

 

 

 

 

Zubereitung von ColiFin für die Anwendung

Step 3

Tear the red or lavender overcap with a twisting movement in the direction of the arrow. Correct performance will allow you to tear the metal ring open. Tear the metal ring side ways so that the breaking point on the opposite side bends. Remove the metal ring from the vial. Safely dispose of the ring and overcap.
 

Zubereitung von ColiFin für die Anwendung

Step 4

Carefully remove the rubber stopper. Add 1 ampoule of sterile 0.9 % NaCl inhalation solution to the vial to dissolve the powder by gently shaking until all powder is dissolved. The solution should be clear.
 

 

 

This webpage is intended for patients