close
Hygienic processing at home

Hygienic processing at home

Clean your equipment correctly and replace components regularly. Tips to maintain your therapy efficiency.

From cleaning to maintenance

Successful inhalation therapy also involves cleaning, disinfection and replacing some of the components at regular intervals. We have compiled some tips here on the following topics:

  • How to correctly process your nebuliser at home.
  • Which components you should replace regularly and why.

Processing nebulisers used for home therapy.

Processing nebulisers used for home therapy – Cleaning

Cleaning.
Clean your nebuliser after every use. To do this, dismantle the nebuliser into its individual parts and clean using warm tap water and dishwashing liquid. All parts must then be thoroughly rinsed under running water. 

Processing nebulisers used for home therapy – Disinfection

Disinfection.
Disinfect your nebuliser once a day. To do this, immerse it in plenty of boiling water for at least 5 minutes. Alternatively, you can disinfect the nebuliser for at least 6 minutes in a commercially available steriliser, for example for baby bottles.

Processing nebulisers used for home therapy – Drying

Drying.
After cleaning and/or disinfection, place the parts of your nebuliser on a dry, lint-free cloth to dry.


 

Processing nebulisers used for home therapy – Storage

Storage.
Where can you best store your nebuliser until your next inhalation therapy? We recommend storing all of the parts in a dry, dust-free environment.

 

Processing nebulisers used for home therapy – Maintenance

Maintenance.
You should replace the nebuliser, the connection tube and the air filter at least once a year. They should be replaced sooner if there is soiling that cannot be cleaned or they are damaged.
 

Please follow the instructions for use

Please always follow the instructions for use which come with the nebuliser and the compressor, and contain detailed information. If you lose them, you can download the instructions for use for your device from the respective product page in our product section. Alternatively, you can contact our local distributor

Downloads

All quick guides on how to correctly process your PARI products

PARI LC SPRINT Nebuliser

Instructions for use023D1036-M 01/15

498 KB Download PDF

PARI LC SPRINT Family

Instruction for use023D1001-M 02/15

608 KB Download PDF
PARI LC SPRINT Nebuliser

PARI LC SPRINT® Nebuliser

Nebulisers with specific aerosol droplet size.


Go to Nebuliser

The colours of the nozzle attachments

The nebuliser chamber is the aerosol generator and therefore the heart of the entire system. To ensure that the droplets get to where they are needed, e.g. the central part or the outer parts of the lung, aerosols with different sized droplets must be generated.

Read more about nebulising

Product Guide

Product guide

Go to product guide

Mouthpiece or mask

Soft nebuliser masks make it possible to treat even the tiniest patients.

Read more

PARI BOY Pro

PARI BOY Pro

The PARI BOY Pro – Flexible with a variable spectrum of droplet sizes for treating severe chronic respiratory conditions

Go to PARI BOY Pro

Contact us

PARI GmbH
Spezialisten für effektive Inhalation

Moosstrasse 3
D-82319 Starnberg
Germany

Tel.: +49 8151 279-220
Fax：+49 8151 279-101

Should you wish to verify the Serial Number of your PARI device, please enter it in the comment section of the contact form and submit it together with your name and email address. No further information is required.