CLEANING AND CARE OF YOUR PARI DEVICE

Careful cleaning is essential if your nebuliser is to function properly as residues from the inhalation solution are left in the nebuliser every time you inhale. Such residue may not only block the nozzle of the nebuliser, but also contaminate the nebuliser solution the next time the device is used. You should therefore always take your nebuliser apart whenever you have inhaled and clean it according to the following procedure. However, make sure you also read the instructions for use!

Dismantle the nebuliser into separate parts. Wash all parts with warm water and some washing up liquid. Thoroughly rinse all parts under running water.

Cleaning

  • Dismantle the nebuliser into separate parts.
  • Wash all parts with warm water and some washing up liquid.
  • Thoroughly rinse all parts under running water.

Disinfecting in a sufficient amount of boiling water (for at least 5 minutes), or Steam disinfector

Disinfecting

  • In a sufficient amount of boiling water (for at least 5 minutes).

OR

  • Steam disinfector (for at least 6 minutes).

Place all parts on a dry, lint-free cloth (for at least 4 hours).Before re-assembling, all parts must be completely dry.

Drying

  • Place all parts on a dry, lint-free cloth (for at least 4 hours).
    Before re-assembling, all parts must be completely dry.

Store parts in a dry, dust-free environment.

Storage

  • Store parts in a dry, dust-free environment.

Maintenance: at least once a year. Change nebuliser, air filter and connection tubing (PARI Year Pack). If dirty or damaged, replace sooner.

Maintenance: at least once a year

  • Change nebuliser, air filter and connection tubing (PARI Year Pack). If dirty or damaged, replace sooner.

Please ensure you read the instructions for use that come with the nebuliser and compressor, which give a more detailed description than this short guide. The instruction manual is included in the device package. If lost you can download the manual from our downloadcenter.