CARING FOR YOUR VORTEX

Caring properly for your VORTEX helps ensure hygienic use and to extend its life.

Please also read the instructions for use!

DISASSEMBLY OF THE VORTEX

Schritt 1 – Zerlegen der VORTEX

First disassemble the VORTEX. Pull off the mouthpiece unit and remove any other accessories (e.g. one-handed operation aid). If you have used a mask, also detach the mask from the mouthpiece unit. Do not remove the blue connecting ring. Make sure that the blue protective cap is open.

CLEANING

Schritt 2 – Reinigen der VORTEX

Clean all parts thoroughly in warm tap water with a little dishwashing liquid.

CLEANING

Schritt 3 – Reinigen der VORTEX

Rinse all parts thoroughly with fresh water.

CLEANING

Schritt 4 – Reinigen der VORTEX

Alternatively, the VORTEX can be cleaned in the dishwasher. To do this, place the individual parts in the dishwasher plate rack and select a programme with a water temperature of at least 50°C. Note that the VORTEX chamber and the mouthpiece should be placed in an upright position.

DISINFECTION

Schritt 5 – Desinfektion der VORTEX

The VORTEX can be disinfected together with accessories (e.g. mask) in a steam disinfector.

DISINFECTION

Schritt 6 – Reinigung der VORTEX

Alternatively, you can disinfect the VORTEX in boiling water: To do this, place all the parts in boiling water for at least 5 minutes. Make sure that the VORTEX and all the accessories (e.g. mask) are completely immersed in the water.

DRYING

Schritt 7 – Trocknung der VORTEX

Allow the VORTEX and accessories to dry at room temperature. Due to the antistatic properties of the VORTEX, you can also dry it using a clean tea towel.

STORAGE

Reassemble all VORTEX parts and store them in a dry, dust-free place.